More likely is that the leak(s) are locatd in the "white" areas. That "discoloration" is indicative of crevice corrosion.
Crevice corrosion occurs in many alloys, not just AL. It occurs when (stagnant) water is in continuous contact with a metal surface. Many alloys depend on an oxide coating happening to stop (further) corrosion, However in a stagnant water situation, the free (dissolved) oxygen in the water (which is used to form the oxidation layer) is depleted/insufficient and the metal continues to react with the water. This is especially a problem if there is ANY salt water at all and the AL reacts with the Chlorine (salt is sodium chloride). This type of corrosion got named crevice corrosion since it occurs mostly in small cracks and crevices where water is trapped for a long period of time.
Improperly designed tank supports can cause this same problem as well as Joe's problem where water got trapped between the tank and the hull in a few spots in a thin film.
_________________________
Capt Bob
1969 Chris Craft 23 ft Lancer "Retriever"
260HP 5.7L MERC w/Volvo outdrive
Atlantic Salt Water Flyrodders, Seaside Park, NJ